As pressure to accelerate production and adopt AI intensifies, quality matters more than ever in battery manufacturing.
Some may say I’m biased, having spent the greater part of my career in quality, but so is the production floor. When an alarm goes off, an operator raises a hand or an end-of-line test fails repeatedly, everything stops. In that moment, from the plant floor to the executive suite, everyone wants the same thing: an answer.
Every minute spent searching for the right answer compounds, resulting in lower yield, delayed shipments and risk to the customer. That’s why even in this era of AI and machine learning, we can’t lose sight of one of the strongest quality control techniques: prevention.
Proven tools like the process failure mode and effects analysis (PFMEA) and control plans have long kept problems off the production floor, and AI and digital connectivity can make them stronger, helping battery manufacturers capture more data, learn faster and keep improving.
Ramping Quickly While Maintaining Yield
In the battery industry, poor yield is a major cause of the “valley of death,” the point of failure where manufacturers struggle to close the gap between a cell that works in the lab and a factory that makes it profitably. According to the Fraunhofer Research Institution for Battery Cell Production, scrap rates of 15 to 30% are common in the first years of cell production, and we’ve all seen what happens when a plant can’t climb out of that range.
So how do you ramp quickly and still hit yield targets? I would argue by dividing the work between proven tools and AI. The fundamentals set the structure: the PFMEA anticipates how the process could fail, the control plan puts safeguards around each step and the techniques behind them keep the process in control. Connected data and AI bring speed and reach: data shows every step at once, and AI finds patterns across thousands of cells that no one could spot by hand.
Prioritizing the Right Data Over More Data
Connected equipment and AI promise faster answers, but the data is only useful if it’s the right data, grounded in a method that leads to true root cause and continuous improvement. This premise has been at the center of many AI conversations I’ve taken part in over recent months. Customers tell us they have data, lots of it, but struggle with how to use it.
This is not just anecdotal. Research suggests the data, and the know-how to use it, are where projects stumble. Gartner predicts that through 2026, organizations will abandon 60% of AI projects that are not supported by AI-ready data. A 2026 Alteryx survey points the same way, with data analysts attributing 47% of failed AI and analytics projects to poor data quality or governance.
These studies span industries, but the lesson holds for battery manufacturing. It’s the right data, not just more of it, that helps answer questions quickly.
The teams that prepare for what could go wrong are the ones whose data can answer questions when something does.
Strengthening the Fundamentals with Digital Capability
Of course, I’m going to say that quality starts with preventing nonconformance in the first place. But I’m not saying that prevention alone is enough. The reality is that, despite our efforts, issues will arise. So we need to continue to detect, inspect and monitor. The speed and effectiveness with which we can now do that have increased with AI and data connectivity.
Detect and Inspect. Detection is the signal; inspection is the confirmation. Connecting the floor to the lab digitally can speed that loop, which is directly tied to how much material ends up suspect, nonconforming, under deviation or scrapped. When you think in terms of production rates, what could it mean to have answers in minutes instead of hours?
Traceability. When every lot and unit carries its own history, finding the affected material becomes a search instead of a scavenger hunt. And when process data is tied to each unit, the cause becomes a finding, not a debate between people, machines and material.
Decision Making. Knowing what is wrong still leaves the question of what to do about it. That is where experienced people stay in the loop. With holistic data arriving sooner, decisions can be made faster and more effectively.
Continuous Improvement. Every event is a lesson. AI doesn’t find the root cause for us. It shortens the list of suspects and puts the evidence in front of us faster, so experienced people can confirm the cause and fix it for good. What they learn goes back into the PFMEA, the control plan and the model. Every quality professional will tell you the key to a root cause exercise is implementing the corrective action. Capturing these exercises digitally, with consistent causes and outcomes, gives machine learning the examples it needs to learn from.
Monitor. Monitoring is how the loop closes. We’ve detected, inspected and corrected, and now we go back to monitoring again, to confirm the fix holds and to catch the next problem early. Sensors capture conditions as they happen, at the speed of production and at points no person could watch continuously. Connected to the rest of the data, those signals allow machine learning to establish what normal looks like and flag drift early, so less material is at risk.
In a crisis, every answer starts with data. Some of it comes from production equipment; the rest is distributed across systems such as ERP, quality management, receiving and inspection. Because we may not know which data will reveal the root cause until an event occurs, connectivity must be part of the AI strategy from the start, not an afterthought.
Questions to Ask Before Your Next Digital Investment
Whether you are ramping a new line or modernizing an existing one, a few questions are worth asking before the next digital investment:
- What are we using to define quality control?
- If a line went down tomorrow, could we find the root cause in days, hours or minutes?
- What are we using to teach our model?
The pressure to move fast is not going away, and neither is the need to get it right. I take quality seriously. I also take AI seriously, and I don’t see them as competing priorities. AI sharpens quality when it rests on sound fundamentals and experienced judgment. Quality matters. AI matters. Speed matters. The challenge now is making them work together.
Want to bring quality and speed to your battery plant? Our team is happy to talk through your use case. Reach out today.
